CHEMIX SPECIALTY GASES AND EQUIPMENT

Clinical Blood Gas Mixture

Blood Gas Mixtures are commonly used in blood gas analysis to measure pO2, pCO2, and ph. By determining the pO2 and pCO2 in a blood sample, professionals are able to diagnose respiratory issues and have support for different surgical procedures. These blood gas tests are accurate and reliable, as well as fast.

CO2  0.5-12.0% + Nitrogen Balance

CGM02114720

CO2  3.0-12.0% + Oxygen Balance

CGM02125410

CO2  3-12% + O2  5-23% + Nitrogen Balance

CGM03114710

Pulmonary Function Gas Mixture

Pulmonary Function Gas Mixture is used in testing how well the lungs exchange gases. This is an important part of lung testing, because the major function of the lungs is to allow oxygen to “diffuse” or pass into the blood from the lungs, and to allow carbon dioxide to “diffuse” from the blood into the lungs.

CO 900-1000ppm + O2 21 % + Nitrogen Balance

CGM03124710

CO 0.3% + He 10% + O2 21% + Nitrogen Balance

CGM04124710

CO 0.4% + Ne 0.5% + C2H2 0.5% + O2 21 % + Nitrogen Balance

CGM05124710

CO 1000ppm + CO2 200ppm + O2 21% + Nitrogen Balance

CGM04124720

CO 0.3% + CH4 0.3% + O2 21% + N2 Balance

CGM04364710

CO 0.3% + CH4 0.3% + O2 21% + Ar 1% + Nitrogen Balance

CGM05364710

CO 0.25% + He 18.5% + O2 21% + Nitrogen Balance

CGM04124710

Calibration Slope / Span Gas

Calibration tests (such as bump checks before each use, field verification, full checks, and factory checks) allow you to verify the accuracy of your detection device. This process involves comparing gases with known concentrations, known as “span gases” or “calibration gases,” with the results provided by your gas-detecting instrument. Span gases are reference gases, or gas mixtures, that are of a precisely-defined nature or composition. Span gases must also be traceable to national or international standards.

Certification of Span gas are done using reference standard traceable to National/International Standards NPL/NIST

CO2 2-12% + O2 5-25% + Nitrogen Balance

CGM03114710

CO2 10% + Nitrogen Balance

CGM02114730

Anaerobic & Aerobic Mixture for Culture

Cultivation of bacteria is a common practice in modern biotechnology. A controlled atmosphere to support the process of growth is necessary. The atmosphere for aerobic organisms is based on oxygen or air and anaerobic organisms require atmospheres based on nitrogen or carbon dioxide. Both types of bacteria usually require a carbon source for maximum growth. Sterilizing mixtures are used for growth control to eliminate all organisms present.

Hydrogen 3% + CO2 97%

CGM02291110

CO2 0.5-10% + Nitrogen Balance

CGM02114730

CO2 0.5-10% + H2 0.5-10.0% + Nitrogen Balance

CGM03114710

CO2 0.5-10% + Oxygen Balance

CGM02115410

CO2 0.5-10% + Air Balance

CGM02116810

Neonatal Pediatric Gases

Neonatal Pediatric Gases is a gas that is inhaled. It works by relaxing smooth muscle to widen (dilate) blood vessels, especially in the lungs. Nitric oxide is used together with a breathing machine (ventilator) to treat respiratory failure in premature babies.

NO 10-25ppm + Nitrogen Balance

CGM02464710

NO 450-500ppm + Nitrogen Balance

CGM02464720

NO 900-1000ppm + Nitrogen Balance

CGM02464730

NO2 9.5ppm + Nitrogen Balance

CG484702000

NO2 10ppm + Nitrogen Balance

CGM02484710

NO2 10-12.5ppm + Air Balance

CGM02486510

Medical Laser Mixture

Medical Laser Gas Mixtures are produced for carbon dioxide lasers. These lasers are not only more precise and less intrusive, they also provide an efficient method of performing surgeries that are highly sterile or have expectations of significant blood loss. The CO2 laser produce intensive infrared radiation, this can be focused to vaporize tissue smaller than a millimeter. This is done by exciting the molecules in the Medical Laser Gas Mixture, a combination of carbon dioxide, helium, and nitrogen, in a discharge tube which then converts the electrical energy into optical energy.

CO2 4.5-9% + N2 13.5-15% + Helium Balance

CGM03112510

CO2 1-10% + CO 1-10% + N2 1-10% + Helium Balance

CGM04112510

Instruments Gas

Being a reputed Manufacturer and Supplier of Instrument Gas Mixture in the market, we make sure that our Instrument Gas Mixture is quality-tested by expert quality auditors. Our Instrument Gas Mixtures are easily miscible. Our Instrument Gas Mixture is used in diverse industries such as Automobile industry, Cement industry, Steel industry, Chemicals industry, etc.

Helium – 99.995

CHGU25050

Carbon Dioxide – 99.97

CHGU11037

Entonox Gas Mixture

Entonox is a well-established pain relieving gas mixture. It consists of two gases, 50% nitrous oxide and 50% oxygen and is more commonly known as gas and air.

Nitrous Oxide 50% + Oxygen 50%

CGM02495410

Contact us with your specific needs, we provide all types of combinations

Phone :
9945075154, 9900575154
E-Mail :
chemixgases@gmail.com
alroy@chemixgases.com
sales@chemixgases.com
Call Now